COEX System – Novastar MX40 Pro

« Back to series

MX40 Pro

Download specification PDF


The MX40 Pro is a flagship all-in-one LED display controller with 20 Ethernet ports in the brand-new control system COEX series of NovaStar. This controller integrates video processing and video control into one box and offers rich video input connectors (HDMI 2.0, DP 1.2 and 12G-SDI), 20x Ethernet output ports and 4x 10G optical ports. It can also work with the brand-new software VMP (Vision Management Platform) to provide a better operation and control experience.

MX40 Pro Features

3 types of inputs 3x HDMI 2.0 (with loop through), − 1x DP 1.2, − 1x 12G-SDI (with loop through)
3 types of outputs − 20x Gigabit Ethernet ports, load capacity up to 9 million pixels, − 4x 10G optical ports, − 1x SPDIF digital audio port
3 types of controls − 1x Genlock signal input (with loop through), − 2x Ethernet control ports, − 1x Auxiliary port
4 independent layers Support up to 4x 4K layers and layer priority adjustment in Z order.
Image scaling Support 4 image scaling modes: custom, pixel to pixel, snap to canvas, and fill screen.
Color Replacement Support free replacement of any color on the image without affecting the performance of other image without affecting the performance of other colors. Replacement of highly saturated colors is recommended for better effect.
14Ch Color Correction Support precise adjustment to hue, saturation and brightness of black, white and the 12 derived standard colors of the red, green and blue primary colors.
Curves Support adjustment to the image RGBW mapping curves.
3D LUT The 17×17×17 3D LUT .cube files are supported to adjust the video source colors.
Dynamic Booster Real-time analysis and dynamic adjustment are made to each frame to significantly improve the display contrast and image details for better visual experience, and effectively control and lower the display power consumption
Full Grayscale Calibration Work with NovaStar’s high-precision calibration system and C3200 scientific grade camera to generate unique calibration coefficients for each grayscale, ensuring uniformity of each grayscale and dramatically improving the image quality.
3D Work with the specified receiving cards, 3D emitter and 3D glasses to bring a fascinating and immersive 3D viewing experience.
HDR − Support HDR10 and comply with the SMPTE ST 2084 and SMPTE ST 2086 standards. − Support HLG.
No rectangle restriction No rectangle restriction for irregular screens. When calculating resolutions, blank pixels do not count towards the total capacity. The used load capacity of Ethernet ports is the sum of the pixels of all cabinets.
Frame Rate Adaptive The controller can be adaptive to various video input frame rates, including decimal frame rates. Custom frame rates are also supported and the step size of fine tuning frame rate is as small as 0.01 Hz.
Two working modes Support the All-In-One Controller and Send-Only Controller working modes. − In the Send-Only Controller mode, the latency can be reduced by one frame. − In the All-In-One Controller mode, the layer and scaling functions are available.
Display system monitoring Support monitoring of the device status and screen status. Any fault and alarm information can be reported actively.

Request a callback

Complete the form below and we’ll call you to discuss your requirements.


Request Pricing

Complete the form below and we’ll call you to discuss your requirements.